 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Micrel, Inc. JK FLIP-FLOP SY10EL35 SY100EL35 SY10EL35 SY100EL35 FEATURES s s s s s 525ps propagation delay 2.2GHz toggle frequency High bandwidth output transistions Internal 75K input pull-down resistors Available in 8-pin SOIC package DESCRIPTION The SY10/100EL35 are high-speed JK Flip-Flops. The J/K data enters the master portion of the flip-flop when the clock is LOW and is transferred to the slave and, thus, the outputs, upon a positive transition of the clock. The reset pin is asynchronous and is activated with a logic HIGH. TRUTH TABLE(1) J L L H H X K L H L H X R L L L L H CLK Z Z Z Z X Qn+1 Qn L H Qn L NOTE: 1. Z = LOW-to-HIGH transition. M9999-121205 hbwhelp@micrel.com or (408) 955-1690 Rev.: G Amendment: /0 1 1 Issue Date: December 2005 Micrel, Inc. SY10EL35 SY100EL35 PACKAGE/ORDERING INFORMATION Ordering Information(1) J K CLK R 1 2 3 R 4 5 VEE J K 8 7 6 VCC Q Q Part Number SY10EL35LZC SY10EL35LZCTR(2) SY100EL35LZC SY100EL35LZCTR(2) SY10EL35LZI SY10EL35LZITR(2) SY100EL35LZI Package Type Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Operating Range Commercial Commercial Commercial Commercial Industrial Industrial Industrial Industrial Industrial Industrial Industrial Industrial Package Marking HEL35 HEL35 XEL35 XEL35 HEL35 HEL35 XEL35 XEL35 HEL35 with Pb-Free bar-line indicator HEL35 with Pb-Free bar-line indicator XEL35 with Pb-Free bar-line indicator XEL35 with Pb-Free bar-line indicator Lead Finish Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Pb-Free NiPdAu Pb-Free NiPdAu Pb-Free NiPdAu Pb-Free NiPdAu 8-PIN SOIC (Z8-1) SY100EL35LZITR(2) SY10EL35LZG(3) SY10EL35LZGTR(2, 3) SY100EL35LZG(3) SY100EL35LZGTR(2, 3) Notes: 1. Contact factory for die availability. Dice are guaranteed at TA = 25C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. M9999-121205 hbwhelp@micrel.com or (408) 955-1690 2 Micrel, Inc. SY10EL35 SY100EL35 DC ELECTRICAL CHARACTERISTICS VEE = VEE (Min.) to VEE (Max.); VCC = GND TA = -40C Symbol IEE Parameter Power Supply Current 10EL 100EL Power Supply Voltage 10EL 100EL Input HIGH Current Min. -- -- -- -- -- Typ. 27 27 -5.2 -4.5 -- Max. 32 32 -- -- 150 Min. -- -- -4.75 -4.20 -- TA = 0C Typ. 27 27 -5.2 -4.5 -- Max. 32 32 -5.5 -5.5 150 TA = +25C Min. -- -- -4.75 -4.20 -- Typ. 27 27 -5.2 -4.5 -- Max. 32 32 -5.5 -5.5 150 Min. -- -- -4.75 -4.20 -- TA = +85C Typ. 27 32 -5.2 -4.5 -- Max. 32 37 V -5.5 -5.5 150 A Unit mA VEE IIH AC ELECTRICAL CHARACTERISTICS VEE = VEE (Min.) to VEE (Max.); VCC = GND TA = -40C Symbol fMAX tPD tS tH tRR tPW tr tf Parameter Maximum Toggle Frequency Propagation Delay CLK to Output MR Set-up Time Hold Time Reset Recovery Minimum Pulse Width CLK, Reset Output Rise/Fall Times Q (20% to 80%) Min. 1.4 290 225 150 250 400 400 100 Typ. 2.0 515 450 0 100 200 -- 225 Max. -- -- -- -- -- -- -- 350 TA = 0C Min. 1.8 340 275 150 250 400 400 100 Typ. 2.2 515 450 0 100 200 -- 225 Max. -- 690 625 -- -- -- -- 350 TA = +25C Min. 1.8 350 275 150 250 400 400 100 Typ. 2.2 525 450 0 100 200 -- 225 Max. -- 700 625 -- -- -- -- 350 TA = +85C Min. 1.8 395 350 150 250 400 400 100 Typ. 2.2 570 525 0 100 200 -- 225 Max. -- 745 700 -- -- -- -- 350 Unit GHz ps ps ps ps ps ps M9999-121205 hbwhelp@micrel.com or (408) 955-1690 3 Micrel, Inc. SY10EL35 SY100EL35 8-PIN SOIC .150" WIDE (Z8-1) Rev. 03 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 TEL USA + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB http://www.micrel.com The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser's use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser's own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. (c) 2005 Micrel, Incorporated. M9999-121205 hbwhelp@micrel.com or (408) 955-1690 4 |
Price & Availability of SY10EL35LZC
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |